SPARTUS®
TIG 250P
MODERN, POWERFUL, DEPENDABLE. INDISPENSABLE WHEN WELDING STAINLESS STEEL.
Technical parameters
| Input | ~3× 400V ± 10% 50 / 60 Hz |
| Welding Current TIG [A] | 5 – 250 |
| Duty cycle [%] | 60 |
| TIG PARAMETERS | |
| Start Amps, End Amps |  |
| Gas pre flow [s] | 0 – 2 |
| Up slope [s] | 0 – 10 |
| Down slope [s] | 0 – 10 |
| Gas post flow [s] | 0 – 10 |
| TIG PULSE mode | |
| Pulse Amps [A] | 5 – 250 |
| Base Amps [A] | 5 – 250 |
| Pulse Width [%] | 5 – 90 |
| Pulse frequency [Hz] | 1 – 200 |
| 2T/4T Control | |
| Arc ignition | HF |
| MMA PARAMETERS | |
| MMA welding mode | |
| Welding current MMA [A] | 10 – 230 |
| No-load voltage [V] | 56 |
| OTHER | |
| Current consumpiton [A] | 9,1 |
| Power factor (cosφ) | 0,93 |
| Efficiency η [%] | 85 |
| Insulation class | F |
| Protection class | IP21 |
| Weight [kg] | 18,9 |
| Dimensions [mm] | 570 × 225 × 420 |
Description:
SPARTUS Master TIG 250P. Small, modern inverter welding machine. Allows gas tungsten arc welding (TIG, GTAW) and manual metal arc welding (SMAW, MMA). Maximum welding current is 250A with high duty cycle 60%. Device is powered from three-phase 400V source power.
SPARTUS Master TIG 250P is equipped with intuitive digital control panel with saving parameters function (10 channels available in memory). The device is capable to precise control of all key parameters in TIG welding, which are presented at simple and easy way on chart the course of the welding process.
TIG pulse welding mode is essential for welding stainless steel components in particular when combining the thin elements. Welder has complete control over the volume of heat input into the material with the ability to adjust the parameters of pulsed current (peak amps, base amps, pulse frequency, pulse width).
Examples of use: industrial, portable repair, workshop, maintenance, constructions.
Device SPARTUS® MasterTIG 200P:
Device Spartus® MasterTIG 250P
3m work clamp
Gas hose
User's manual
WIRED FOOT CONTROLER [DKK]:
MasterTIG 250P packages 4m / 8m
| Device SPARTUS® MasterTIG 250P | Device SPARTUS® MasterTIG 250P |
| TIG torch SPARTUS® SPM 26 1B X 4m | TIG torch SPARTUS® SPM 26 1B X 8m |
| TIG toolbox (consumable kit) | TIG toolbox (consumable kit) |
| 3 meter electrode holder | 3 meter electrode holder |
| 3m work clamp | 5m work clamp |
| Gas hose | Gas hose |
| User's manual | User's manual |
WIRED FOOT CONTROLER [DKK]: |
WIRED FOOT CONTROLER [DKK]: |
